Concrete, Cement, Plaster "Sandstone" Color Stain, Dye Make 20 ounces

$14.99
Qty:

Secure Checkout Check out now.
Fast, Easy, Secure Checkout.

0

Concrete, Cement, Plaster "Sandstone" Color Stain, Dye Make 20 ounces

Details

WHY CONSIDER OUR CONCRETE DYE STAINS FOR YOUR PROJECT?
Acrylic concrete stains are ideal for coloring just about any concrete surface. They penetrate the surface and create semi-transparent colors. Unlike the chemical process of acid stains, acrylic stains act like a dye or stain, producing a more uniform appearance. They are thin allowing them to seep into the pores of the surface they are covering. Thus, acrylic stains don't peel or flake away like paint will. They are resistant to Ulta-Violet rays, foot and vehicular traffic, heat from vehicle tires, moisture, mildew, acids and alkalis, as well as the ravages of mother nature. They work well for both new (like our stone and tile) or existing concrete surfaces. They are especially effective on concrete with too many cosmetic defects for acid staining.

Using concrete stain is an easy way to customize and jazz up plain gray concrete. It will bring color and life to your deck, driveway, patio, lanai, porch, basement floor, etc. Stain is a perfect alternative to paint when you want something that's not going to chip or flake. It also allows your concrete to maintain some of its natural appearance and character. You've probably heard of acid stain, and seen some examples of how these stains can transform the look of a concrete surface. Our stains are acrylic-based, designed for concrete, and may be more suitable and desirable for your safety, situation, taste, and the environment.

Acrylic Stains Versus Acid Stains: Our acrylic concrete stains are semi-tranlucent and create a more uniform color than an acid stain. It doesn't react with concrete, but penetrates the pores and adheres to the concrete, acting like a dye. You have much more control over the outcome, and our stains will help mask some of the surface defects and variations. These are much easier and safer to work with than acid stains, which is a major plus for the average do-it-yourselfer. Also, our dye stains are available in more vibrant colors. If you desire a brightly colored surface that you have control over the application with, then choose our stains.

GENERAL PRODUCT INFORMATION: These concentrated concrete stains come in 4 oz. samples, quarts, gallons, and (Special Order) 5-gallon pails. All sizes of dye stain concentrate are mixed 1 to 4 with distilled or de-ionized water. They yield five times the concentrate size of the desired color stain. THEY ARE AVAILABLE IN 20 COLORS.

4 oz. of concentrate yields 20 oz. of stain, and covers 35 square feet. - Shipping weight: 1 lb.
1-quart of concentrate yields 1.25 gallons and covers 300 square feet. - Shipping weight: 3 lbs.
1-gallon of concentrate yields 5 gallons and covers 1,000 square feet. - Shipping weight: 10 lbs.
5-gallons of concentrate yields 25 gallons and covers 5,000 square feet. - Shipping wT.: 47 lbs.

These are water-based, extra strength stains, developed to achieve a natural appearance on concrete floors. They were formulated as a user friendly alternative to hazardous solvent and acid-based stains. They offer superior adhesion to both interior and exterior concrete, brick, stone, plaster, and terra cotta surfaces. As with all stains, the use of a sealer is recommended to extend the stain's longevity.

APPLICATION METHOD: To achieve a natural variegate or mottled appearance, stain should be applied by creating a mist via an airless sprayer, High Volume Low Pressure (HVLP) sprayer, pump sprayer or trigger spray bottle (plant mister). The variegation is the result of the specific gravities of the pigments as well as the absorption rate of the application surface. Roller application methods force absorption, resulting in a more monotone or painted appearance. Application with a brush or sea sponge in areas where coverage and product control are warranted such as corners and walls, and other vertical applications, or where a specific pattern or design is desired.

Secondary - Highlight Color: To achieve increased color depth or mottled appearance, a secondary or highlight coat can be applied as soon as the initial color is dry to the touch, (approximately 15 minutes). Note: All Smith's Color Floor Colors are compatible, thus can be mixed, sprayed simultaneously and layered to achieve a desired appearance. Let your imagination run wild!

For additional information about these stains, please visit our www.TheMoldstore.info training and Information website. As always, should you have questions not answered on our websites, please email them to us, and we will get right back to you with an answer.

If you are interested in starting a stone, paver, brick and tile manufacturing business, visit www.Oldeworld.com, which is our Business Opportunity information website. There are also additional photos of installations available there.

Inspiration/Story Behind This Product

We started our company on January 15, 1992 to help homeowners, do-it-yourselfers, crafts people, gardeners, landscapers, and commercial concerns make their own custom-colored building products at home while saving as much as 90% off of the normal retail prices of those products. For example, concrete stone veneer that you see every day on the front of homes and buildings can cost more than six dollars per square foot, plus installation. With our molds and supplies, an average person can make comparable stone veneer for 45 to 65 cents per square foot, depending on the stone thickness and style. Custom-colored concrete tile can be made for about 30 cents a square foot. We also offer molds (moulds) for pavers, stepping stones, brick and more. And included with each purchase is a dedicated Instructions website, email support, customer contests, and more. Most of our website photos are from customers who had never used molds or worked with concrete or plaster before. WHY NOT YOU?

Materials Used

Our molds are made with .060 or .093 high-impact rubberized ABS plastic for long life, stability and the ability to duplicate a design. Our stains are water-based acrylic colors.

More Info

GENERAL PROPERTIES:
A decorative stain for concrete surfaces. Smith's Color Floor stain is water submersible, alkali, weather and UV light resistant. The use of a topcoat is suggested. The stain is compatible with solvent-based, water-based, single and two-component sealer products, including but not limited to urethanes, acrylics and epoxy clear sealers. Warning: They are not compatible with Methyl Methacrylate or penetrating (e.g. sodium silicate) sealers.

CLEAN UP: Immediately clean-up work area and tools with water while stains are still wet. Compatible with neutralized acid-based stains. - Compatible with overlays, as a topical stain and as an integral color. - May be applied over previously sealed surface. - Low odor - Fast air-drying. - Fast delivery, NO Red Label. - Low VOC. - Interior or Exterior application.

Recommended Use: It is a user-friendly stain for concrete floors and other porous substrates. May be applied over sealed surfaces, (refer to Application Instructions).

Not Recommended For: Non-porous substrates (e.g. metal, resin, fiberglass) when submerged in water or exposed to severe weather conditions.

Thinning: The recommended dilution ratio of the stain/dye is 1 to 4 with distilled or de-ionized water. Increased transparency as well as lighter color shade can be achieved by increasing the dilution ratio (amount of water to concentrate). The dilution ratio should not surpass 1 part concentrate to 8 parts distilled, de-ionized or reverse osmosis water. Decreasing the dilution ratio (e.g. 1 part concentrate to 1 part water) will increase the hide or opacity. This allows the applicator to cover stains and blemishes as well as achieve uniformity on different surfaces. A natural variegated appearance is still achieved at lower dilution rates. Note: As dilution ratio increases, the amount of vehicle solids (glue) decreases, resulting in a less durable stain.

If you are interested in starting a stone, paver, brick and tile manufacturing business, visit www.Oldeworld.com, which is our Business Opportunity information website. There are also additional photos of installations available there.

Product Attributes

Color: Orange

Accepted Payments
  • PayPal Acceptance Mark

Shipping

United States
First Item: $0.00
Additional Items: $0.00

Policies

RETURN POLICY:

Items must be returned within 7 days of receipt, postage prepaid, with prior approval, and include the issued Return Authorization Number. Items of a proprietary nature like Training Manuals, Videos, etc. are not returnable.
Returned items are subject to a 20% restocking fee after 7 days.
All items must be in (new) unused, resaleable condition.
Items may not be returned without authorization number from Olde World.
Items returned without prior authorization will not be issued a credit.
Items shipped FREE will have the outbound shipping costs deducted from the credit.

We normally ship from our Port Charlotte, FL shipping facility daily. Orders are shipped UPS or USPS Priority Mail within the USA. We ship USPS Priority Mail International to foreign countries, as we've found that method to be the fastest, most reliable, and least expensive for our customers.

Orders are normally ready to be shipped the day after payment is received. The rest of the time it takes to get to you is due to the carrier's transit time. We have no control over that, so PLEASE... ALLOW SUFFICIENT "TRANSIT TIME" BEFORE CONTACTING OUR SHIPPING DEPARTMENT ABOUT YOUR ORDER.

Please understand that it takes over a week "in transit" for packages to reach the west coast. Figure on a total of ten days from the time you make an immediate payment for your purchase, before being concerned about the whereabouts of your order. Remember that UPS and other carriers normally do not work on weekends... and once in a great while, we don't either! :-)

FOR FASTEST SERVICE...
EMAIL SHIPPING QUESTIONS TO: HELP@OLDEWORLD.COM OR PHONE 941-624-5356

Reviews



TheMoldStore has not yet received any comments from shoppers.

Similar items

More items from TheMoldStore

  • Honey Stain
    Concrete, Cement, Plaster "Honey" Color Stain,...
    $USD 14.99
  • Black
    Concrete, Cement and Plaster Color - Black - 5...
    $USD 53.99
  • 30 Cobblestone Molds Make 1000s of 6x6x2.5...
    $USD 209.99
  • Make Mexican Tiles Saltillo Floor Tile Kit...
    $USD 421.99
  • Make Stone Wall Caps - DIY Supplies Kit + 6...
    $USD 174.99
  • Make Castle Stone - DIY Supplies Kit + 29...
    $USD 269.99
  • Make Ledgestone - DIY Rock Kit w/all Supplies+...
    $USD 309.99
  • Make River Rock - DIY Kit with all Supplies+...
    $USD 499.99
  • Make 8x8 Pavers - Driveway Paver Kit w/all...
    $USD 153.99
  • 6x9 Driveway Paver Making Kit Complete w/all...
    $USD 253.99
  • Make 6x9 Keyhole Driveway Pavers - Kit &...
    $USD 299.99
  • Make Thick Driveway Pavers - DIY 5x9 Cobble...
    $USD 349.99
  • MAKE 6x12 PAVERS - DIY Castle Stone Patio Kit...
    $USD 193.99
  • MAKE 4x8 BRICK, Rustic Brick Veneer Kit...
    $USD 199.99
  • Make Giant 19x34 Blank Panel Wall Plaques With...
    $USD 79.99
  • Make Giant 19x34 Rampant Lion Wall Plaques...
    $USD 159.99
  • MAKE Garden Edging - DIY Kit w/all Supplies+ 6...
    $USD 159.99
  • MAKE Garden Edging - DIY Kit with all...
    $USD 184.99
  • 12 Keystone Molds Make 1000s of Keystone...
    $USD 47.99
  • Make 1000s of Keystone Driveway Pavers for...
    $USD 54.99
  • Make 100s of Hex Driveway Pavers for Pennies...
    $USD 58.99
  • Make Pavers for Pennies, 6 Thick 5x9 Brick...
    $USD 69.99
  • 12 Cobblestone Molds Make 1000s of 6x6x2.5...
    $USD 83.99
  • 13 Molds Make 1000s of Hex Driveway Pavers for...
    $USD 119.99
  • 30 Concrete Molds Make 1000s of Keystone...
    $USD 119.99
  • MAKE THIS TILE w/These Six 6x6x.5 Rustic...
    $USD 22.99
  • MAKE THIS TILE w/These 12- 4x4 Daisy Design...
    $USD 32.99
  • Make Slate Flagstones and Many Concrete Slab...
    $USD 42.99
  • MAKE This 18x2 Inch Thick Compass Stepping...
    $USD 42.99
  • Terra Cotta
    Concrete, Cement and Plaster Color - Terra...
    $USD 14.79

More items on ArtFire