Shiny opaque medium lemon yellow glass handmade lampwork beads wrapped in fine silver with a shiny glassy bead finish.
These bright beads were hand made using medium lemon yellow glass. I wrapped them in .999 fine silver. These rich and creamy opaque yellow beads are gorgeous with their silver sparkles.
Sold individually by the bead.
Quantity: 1 bead
Measurements: 10-11mm x 7-8mm
Mandrel size: 1/16
Hole size approximately 2mm
Want or need more? Just ask and I will reserve a special listing for you.
Also available in a 3/32 mandrel - about a 2.5mm hole. If you prefer 3/32mm mandrel, let me know or you will automatically receive beads made on a 1/16mm mandrel.
All glass lampworked beads are handmade by me, Covergirlbeads glass artisan, Charlotte Hayes. I am a Texas artist living in Alvin near the Gulf of Mexico. I am located near larger and popular Texas cities like Houston, Galveston and Sugar Land. I love incorporating my lampwork beads into jewelry designs using semi precious gemstones, pearls, crystals and other mixed media materials to create beautiful jewelry for you. Care and love is given to each piece.
Member of Self Representing Artists SRA #H98
Handmade beads made in the USA
Handmade beads made in Texas
LAMPWORK - THE PROCESS OF MELTING GLASS
I melt glass using my Carlisle mini cc torch winding it onto a mandrel (metal rod) that has been dipped in bead release (a silica based clay) to prevent the glass from sticking to the mandrel. I use a variety of moretti/effetre Italian glass, Vetrofond, Lausha, CIM, Reichenbach, Double Helix, Bullseye, TAG and Reichenbach glass. I also use CZ cubic zirconias, dichroic glass, .999 fine silver, copper, silver leaf, gold leaf and palladium to add interesting designs and create elegant to organic styles of beads. After forming the bead, it is placed in the kiln to go through the annealing process.
Annealing is a MUST. It is the process where I place my beads in my preheated digitally controlled Glass Hive kiln and allow them to rest for several hours in a glowing heat bath until the glass is the same temperature all over. This relieves stress in the bead. Then the temperature is slowly ramped down overnight until the beads are completely cooled to room temperature. This process takes hours and adds strength and durability to each bead. BEADS THAT HAVE NOT BEEN ANNEALED HAVE A GREATER CHANCE OF CRACKING DUE TO STRESS AND THERMAL SHOCK.
CLEANING THE BEAD HOLES
Cleaning the bead release out of the hole is very important. I use an electric dremel with a diamond bit to clean each bead individually. Clean bead holes make for a nicer construction for artisans to assemble their jewelry. If you will inspect the cheap imports, you will notice they are filled with bead release and you should question whether or not they were kiln annealed. Always buy handmade!
Numerous pictures are taken in an effort to get just the perfect photo for you to view. This is can be very time consuming but worth every minute to ensure you see quality photos. Sometimes beads can be very stubborn and nearly impossible to show their true beauty.